CONSTRUCTION CHEMICALS

Chloride free water reducer conforming IS : 9103-1999 is recommended for use in floor slabs, foundation, column, beams, ceiling & pavement. It can be used to reduce cement content to the extent of 8 - 10% by maintaining the original strength. Dosage 150 ml to 250 ml / 50 kg cement. INDPLAST SP :

High range water reducing and super plasticizer conforming IS : 9103-1999 & ASTM C-494, TYPE A. It is ideal for precast concrete, ready mix concrete and mass concrete. Dosage 0.6 % to 1.5 % by weight of cementitious materials.

Non-chloride based set accelerating admixture for concrete conforming ASTM C 494, Type C. It accelerates cement hydration resulting in shortened setting times and increase early compressive strength. Dosage 1 to 1.5 ltrs /50 kg cementitious materials.

Chloride based accelerating admixture for unreinforced cement concrete/mortar confirming ASTM C 494, Type C. Ideal for providing increased resistance to frost damage during and aGer construction of hollow blocks. Ideal for block making. Dosage : 200 ml to 500 ml / 50 kg cement bag.

Integral waterproofing liquid admixture for concrete and plaster confirming IS : 2645 – 2003. It reduces the water demand for required workability and minimizes segregation and bleeding. To minimize permeability and increase the waterproofing properties. Dosage : 150 ml to 250 ml / 50 kg cement.

INDPLAST IWP :

Integral waterproofing powder admixture for concrete and plaster confirming IS : 2645 – 2003. It improves the effectiveness of water in the concrete and sand : cement mix and reduces permeability. Dosage : 200 gms / 50 kg cement.

Integral waterproofing powder for concrete confirming IS : 2645-2003. It is formulated from a blend of hydrophobic materials, which together form a matrix of insoluble, water resistant material within the cement paste. Dosage : 1 kg / 50 kg of cementitious materials.

Is a polyester fiber for concrete reinforcement that complies with ASTM C 1116. It highly improves the durability of structure and prevent the shrinkage cracks. It prevent moisture from entering throughout the concrete and plaster. Dosage : 125 gms / 50 kg cement.

Is a high performance polypropylene fibers and it is a 100 % virgin polypropylene. It increases tensile and compressive strength. Reduces permeability and hence ensures water tightness, reduces number of construction joints in the floor, minimizes steel reinforcements in industrial floors.

Dosage : 125 gms / 50 kg cement.

It is a ready to used liquid accelerating admixture for concrete that contains no calcium chloride. It improves both plastic and hardened concrete properties, and significantly increases the rate of stiffening setting and early strength development. Dosage : 500 ml to 1 ltr /50 kg cement.

Chloride free water reducer conforming IS : 9103-1999 is recommended for use in ¿¿¿oor slabs, foundation, column, beams, ceiling & pavement. It can be used to reduce cement content to the extent of 8 - 10% by maintaining the original strength. Dosage 150 ml to 250 ml / 50 kg cement.
INDPLAST SP : 

High range water reducing and super plasticizer conforming IS : 9103-1999 & ASTM C-494, TYPE A. It is ideal for precast concrete, ready mix concrete and mass concrete. Dosage 0.6 % to 1.5 % by weight of cementitious materials.

Non-chloride based set accelerating admixture for concrete conforming ASTM C 494, Type C. It accelerates cement hydration resulting in shortened setting times and increase early compressive strength. Dosage 1 to 1.5 ltrs /50 kg cementitious materials.

Chloride based accelerating admixture for unreinforced cement concrete/mortar con¿¿¿rming ASTM C 494, Type C. Ideal for providing increased resistance to frost damage during and aGer construction of hollow blocks. Ideal for block making. Dosage : 200 ml to 500 ml / 50 kg cement bag.

Integral waterproo¿¿¿ng liquid admixture for concrete and plaster con¿¿¿rming IS : 2645 – 2003. It reduces the water demand for required workability and minimizes segregation and bleeding. To minimize permeability and increase the waterproo¿¿¿ng properties. Dosage : 150 ml to 250 ml / 50 kg cement. INDPLAST IWP : 

Integral waterproo¿¿¿ng powder admixture for concrete and plaster con¿¿¿rming IS : 2645 – 2003. It improves the e¿¿¿ectiveness of water in the concrete and sand : cement mix and reduces permeability. Dosage : 200 gms / 50 kg cement.

Integral waterproo¿¿¿ng powder for concrete con¿¿¿rming IS : 2645-2003. It is formulated from a blend of hydrophobic materials, which together form a matrix of insoluble, water resistant material within the cement paste. Dosage : 1 kg / 50 kg of cementitious materials.

Is a polyester ¿¿¿ber for concrete reinforcement that complies with ASTM C 1116. It highly improves the durability of structure and prevent the shrinkage cracks. It prevent moisture from entering throughout the concrete and plaster. Dosage : 125 gms / 50 kg cement.

Is a high performance polypropylene ¿¿¿bers and it is a 100 % virgin polypropylene. It increases tensile and compressive strength. Reduces permeability and hence ensures water tightness, reduces number of construction joints in the ¿¿¿oor, minimizes steel reinforcements in industrial ¿¿¿oors.

Dosage : 125 gms / 50 kg cement.

It is a ready to used liquid accelerating admixture for concrete that contains no calcium chloride. It improves both plastic and hardened concrete properties, and signi¿¿¿cantly increases the rate of sti¿¿¿ening setting and early strength development. Dosage : 500 ml to 1 ltr /50 kg cement.

Is a two part, low viscosity Epoxy resin designed for injecting in to cracks in concrete brickwork and masonry . EPOGROUT LV epoxy resin system for gaps ranging from 0.3mm to 10 mm.

Polyester resin based high early and rapid strength gain grout. INDFIX FAST SET for the anchoring of steel bars and bolts into concrete, masonry and brickwork.

Is a plasticizing, shrinkage compensating grout additive. INDGROUT ADD is a single pack powdered admixture which when added to cement : sand produces an easy ¿¿¿ow, high strength, shrinkage compensating grout. Dosage : 200 gms / 50 kg cement.

High strength, free ¿¿¿ow, three part epoxy grout. A unique epoxy grout system even for running industry with minimum production shut down. Ideal for very heavy dynamic loads like heavy duty rails, machineries, compressors, dowel bars, studs etc. High tensile & ¿¿¿exural strength attains 1000 kg/cm2 compressive strength in 7 days. Packing : 5 Ltrs pack

Is a ready-mixed, non-shrink, ¿¿¿owable, high-strength structural grout. Required such as : precise machine bases, pump and equipment bases, structural columns, machine tools and compressors. Yield : 25 kg bag / 13.7 ltrs.

General purpose, non-shrink, high strength free ¿¿¿ow cementitious grout. It is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., Yield : 25 kg bag / 13.3 ltrs.

It is a two-pack solvent free, high build epoxy resin system for application as a heavy duty ???oor coating. It provides a colored gloss ???nish which is extremely hard wearing and abrasion resistant. It provides a hard wearing, decorative, and dust-free ???nish. Coverage : 9 - 10 m2 / 5 kg.
SAFECOTE EP (S) :

It is a two component solvented high build surface protective coating is based on epoxy resins specially formulated to provide a thixotropic coating suitable for application to vertical surfaces. Corrosion resistance coating for structural steel, storage tanks, and equipment in re???neries, pulp and paper mills and chemical plants. Coverage : 12 - 14 m2 / 5 kg pack.

It is a two pack, high build, semi-gloss solvented epoxy coating for concrete substrates. It provides a hard wearing, aesthetic ???nish with good resistance to chemical attack. Coverage : 11 - 12 m2 per 5 kg pack at 250 micron thickness.

SAFECOTE AR :

It is a premium quality crack bridging, anti carbonation, water based, elastomeric coating for interiors and exteriors surfaces. It provides a smooth decorative durable coating for concrete and masonry surfaces like big commercial buildings, public places, residential building, concrete bridges, shopping mall, schools, etc. It is suitable for use especially those in aggressive marine and coastal environments. Coverage : 3.5 - 4 m2 per 1 kg pack in two coats.

It is a crack bridging, anti carbonation textured protective & decorative coating for concrete masonry. It provides a smooth decorative durable coating for concrete and masonry surfaces c. It is suitable for use especially those in aggressive marine and coastal environments. Coverage : 3.5 - 4 m2 per 1 kg pack in two coats.

It is a two-component polyurethane resin system, comprising pigmented base and a hardener, speci???cally formulated to protect concrete and steel. Used for interior or exterior non-ferrous metal, ???berglass, cement or concrete surface, where resistance to solvents, acids and abrasion is required. Coverage : 18 - 20 m2 per 5 kg pack at 100 micron DFT in two coats.

A two component based on polyamine cured coal tar epoxy product with outstanding water and crude oil resistance that makes it eminently suitable for use as an anticorrosive on underwater areas. Coverage : 9 - 10 m2 per 5 kg pack at 400 micron DFT in two coats.

IND SHINE :

It is the latest high performance clear transparent resin that protects pavers and slabs made of concrete or natural stone. Coverage : 100 – 110 sq. G. per coat / per litr.